« Back Record Document

Some aspects of the outline design specification of a 0.5 KW stiring engine for domestic scale co-generation. J. Proceedings of the Institution of Mechanical Engineers. Part A. Journal of Power and Energy.

1996

520
SEPARATA

This paper describes the desing considerations that were involved in the production of a prototype Stirling engine, primarily intended for use in a domestic scale combined heat and power system. These are discussed in terms of the specification of basic design parameterd- configuration working fluid, etc. First the particular requeriments of this application are considered primarily a power output of 1 Kw or less, suitability for high-volume mass production, ultra long life and as high an efficiency as possible. The desing that emerges is relatively simple, of low specific power output and with rather conservative operative operating parameters- temperature, pressure and speed..

Presenta ilus., diagrs., y gráfs.

Ministerio de Ambiente y Energía. Secretaría de Planificación del Sub-Sector Energía - Centro de Información de Energía y Ambiente, CIENA

Grettel Ruiz Matarrita

Calle 25, Avenidas 8 y 10. San José, Costa Rica

(506)25476900 - 25476239

De lunes a viernes de 8 a.m. a 12m.

Desarrollado por: Aikyu-Systems